It's absolutely useless Now, any suggestions for a paint stripper that works would be appreciated.
It used to be that if you splashed it on the back of your hand you knew all about it, I reckon you could bath in this stuff and not feel it
Printable View
It's absolutely useless Now, any suggestions for a paint stripper that works would be appreciated.
It used to be that if you splashed it on the back of your hand you knew all about it, I reckon you could bath in this stuff and not feel it
They took all the good stuff out of it a number of years ago thanks to health and safety. I have tried a few other brands but all hopeless. For smaller articles wrapping them tightly in a plastic bag keeps the fumes in and improves the performance.
Unfortunately this is a big cam cover, I left it for two hours and it hasn't even touched it, I know it's just aerosol paint because I sprayed it a few years backQuote:
Originally Posted by jonah
Starchem synstrip is very good if you can get it.
Would you like a jar of Uncle Alec's Chili Relish?
EU banned methylene chloride - key ingredient of the old version.
Time to get out the wire wool and apply some elbow grease :peaceful:
Have a look on YouTube as I seem to remember Roger Bisby of Skill builders did a test on this.
Fifa
Proper creosote went the same way as Nitromors. Now there's some wishy-washy alternative which has the same sticking power as watered down soy sauce.
As an apprentice 48 years ago the stripping of Shellac’s and old varnish surfaces was a job you did. I remember back then if you got some little flicks off the brush on to your bare skin it was hell. At the end of the day you looked like you had measles. As said it would not strip the skin of a rice pudding now. All to do with H&S changes back in 2008 I remember it well all my COSHE Assessments had to be changed for the Risk and Method Statements.
I found something pretty effective on aluminium castings, the Dirtkiller attachment on my pressure washer, it just eats paint, obviously there are a lot of things you mustn't point it at.
Vapour-blasting seems to be the new method, and you can find several people offering the service on a kind of 'paying hobby' status.
Have a search on Facebook Marketplace. I doubt you'd have to travel more then 50miles.
Not a lot of money and leaves the castings/components ready for a wipe down with acetone and painting/laquering.
Similar experience with Jeye's Fluid. Used to be a great mosskiller, even in very low concentrations.
Yup Chris is correct, we used to use meth c to remove resin from molds. With the new “ dumbed down” paint strippers you use more, need more local extraction and the job took three times as long, progress eh?Quote:
Originally Posted by Chris_in_the_UK
Yes indeed.Quote:
Originally Posted by Filterlab
The old creosote penetrated and protected the wood.
Today's stuff in not much better than emulsion that simply lies on the surface and gets virtually washed away after a season.
I mixed 50-50 new creosote and used engine oil.Quote:
Originally Posted by Neil.C
Seems to almost be like the original stuff...albeit not as environmental.
Yes it's called creocote now I think. I bought some years ago and added my old engine oil from my oil change. Just don't smoke next to my fence please.Quote:
Originally Posted by Filterlab
Unfortunately there are too many oil seals and carriers to risk vapour blastingQuote:
Originally Posted by blackal
Add Round Up to the list of “used to be good, now rubbish”
Creosote is still available from agricultural suppliers .
I was given the tip by an employee as it’s used in/on chicken buildings as it prevents “ chicken mite “ .
The only draw back is it’s in 25 litre containers , however my friends all have creosote treated sheds and fences .
Sent from my iPhone using TZ-UK mobile app
Still available on eBay, top strength too.Quote:
Originally Posted by demonloop
Try sodium hypochlorite, works wonders.Quote:
Originally Posted by David_D
Just used up 4 ltrs on my monoblock driveway - it's now about £33 per 4ltrs.Quote:
Originally Posted by reggie747
Dilute from 14% by vol to around 10% for use, and make sure if spraying it, that you clean off the pump - as it corrodes metals.
Don't get any on your clothes - it bleaches where it touches.
I bought in bulk at 18 quid for 25 litres at 15% juiced down 4 parts water to one part solution. (Walker Bros, Oldham)Quote:
Originally Posted by blackal
You're right about it bleaching clothing/shoes out, no bother.
I brush it one my drive with a long hair soft sweeper, leave it 20-30 mins then rinse it off with a jet wash, looks like new on completion.
Would wrapping it in clingfilm assist?
Interesting, our resin drives got a bit of algae on it this winter & if this will be the best thing to to try, or maybe start a little milder like algae-gone or whatever it’s called.Quote:
Originally Posted by reggie747
Sent from my iPad using Tapatalk
+1 for sodium hypochlorite on driveway/patio
Sent from my CPH2415 using Tapatalk
We're saved. :eagerness:Quote:
Originally Posted by Chris_in_the_UK
Exactly the same with Jeyes fluid , the new stuff is absolute garbage .Quote:
Originally Posted by Filterlab
BAC-50 is best for algae on patios/paving and fences. Amazon sell it :thumbsup:Quote:
Originally Posted by Mj2k
Banned from domestic use in 2003 under EU biocidal products regulation due to environment and health issues (col tar based). Still available for commercial use (railway sleepers, telegraph poles, agricultural fencing). A further increase in the ban is coming in early 2005 except for railway sleepers and telegraph poles.Quote:
Originally Posted by Filterlab
^^ 2025?
That is what I do with oven cleaner - brush it on to the sides and cover with cling-film. Way better as it stays in gel form.Quote:
Originally Posted by lewie
for the oven roof - lay out alu foil, with cling film on top. brush the gel on to the oven roof and offer up the clingfilm/foil. drop the foil out and pat the clingfilm on to the surface.
The foil is just to support the clingfilm as you lift it into position.
Cheers, will have a look at that stuff. Think I’ve got some old / rubbish stuff in the garage but know it’s not enough to cover everywhere.Quote:
Originally Posted by Halitosis
Sent from my iPad using Tapatalk
Typo, yes 2025Quote:
Originally Posted by Filterlab
Armillatox is now defunct - the product to go for moss, algae etc
Apparently it wasn't worth the hassle of going through the regulation.
B
Thanks. Think I posted for some suggestions a while ago. Nothing I’ve tried has been as effective as a very small amount of Jeyes in a few litres of water!Quote:
Originally Posted by reggie747
Jayes used to be great for keeping ants out of the house, go all the way round the outside and they won't cross it, we used to have an ant man once a year, when he retired he told me that, it does workQuote:
Originally Posted by David_D
If it's that expensive use household bleach. Only ~5% but should still do the job even if you have to use more.Quote:
Originally Posted by blackal