Printable View
Just playing around with my new(ish) iPhone 13 camera & noticed this…
https://uploads.tapatalk-cdn.com/202...94c99f89ca.jpg
https://uploads.tapatalk-cdn.com/202...0bd17eb5c9.jpg
Which I hadn’t noticed before.
These new iPhone cameras are pretty impressive.
z
We did have a thread on the orientation of the etched Omega logo a few years ago, as I recall. On my Speedy, it's upside-down.
https://i.ibb.co/HGGWhjv/omegalogo-crystal.jpg
I’m guessing the crystal can be rotated when putting in, clearly the person doing it hasn’t bothered to check if it’s straight. Wouldn’t bother me as such, but you think they would get these little details right.Quote:
Originally Posted by monogroover
Mine is wonky also. I’m usually OCD about these things, but this doesn’t bother me.
Sent from my iPhone using Tapatalk
I thought you were talking about the central chrono hand being off-centre!
Sent from my iPhone using Tapatalk Pro
Do Omega fit the crystals by hand? Never thought about it but I'd have imagined some sort of automated production line with them being popped into the cases by a machine.Quote:
Originally Posted by Wallasey Runner
It doesn't bother me - as I cannot see it without macro.Quote:
Originally Posted by Linc
This was just the first time I got around to looking for it.
z
I think it’s fine - it’s the rest of the watch that’s off centre
I agree in it’s too small a detail to bother but …..isn’t watchmaking all about the detail and precision?
Sent from my iPhone using TZ-UK mobile app
Mine isn’t [emoji854]
https://i.postimg.cc/cJ4GNd4H/3-D51-...-F1-C0-EE7.jpg
Me too - that’s much more obvious than the logoQuote:
Originally Posted by notenoughwrists
If you want to stay happy, never look at a watch through a macro facility. :tongue-new:
That would drive me nutsQuote:
Originally Posted by notenoughwrists
Thankfully it's bang on - just the parallax effect in the (slightly offset) photo.
z
Does it really matter whether the symbol is correctly aligned......honestly! I`ve fitted plenty and I`ve never bothered, pressing an acrylic crystal into a case can be tricky, my priority has always been to get the crystal to go in evenly to avoid the risk of damaging it. Considering the potential for an OCD owner to complain I now make every effort to get it straight, but if the crystal's gone in nicely there's no way I`d remove it just to attempt to correct a minor misalignment of a symbol that can only be seen properly under magnification. Folks who perceives these issues as an indication of quality are fooling themselves.Quote:
Originally Posted by Wallasey Runner
Owing to the distance between the dial and the hand it's all too easy to perceive a slight error when in reality it's the parallax effect you're seeing. I dislike fitting chronograph hands for this very reason, getting the hand on correctly is a tricky job but on some watches I struggle to decide whether it really is correct or not. I cover one eye, place the watch on a flat surface, then get my open eye over the centre of the watch and trust what I`m seeing.Quote:
Originally Posted by zelig
Mine's completely upside down but I can only see it when I look through a loupe.
Which I only do to check which way up my omega is.
So that's ok.
Mine was bang on; I’m afraid it would bug me, yes. If a manufacturer can’t get the alignment right, they shouldn’t but a directional logo on the crystal - I don’t see how it’s any more acceptable than misaligned printing on the dial.
Both my Seamaster and Speedmaster are wonky, that said zooming in on the crystal makes you realise how badly scratched they are, the Speedy needs a good clean as well! Yuk!
https://uploads.tapatalk-cdn.com/202...b4427e2cdd.jpg
https://uploads.tapatalk-cdn.com/202...d26606de44.jpg
Thanks for the insight into your lack of care and professionalism as a watchmaker. Perhaps you could enlighten us with your professional qualifications and put an end to cynics thinking that you are likely an unqualified cowboy who stalks the forum touting for business.Quote:
Originally Posted by walkerwek1958
Quote:
Originally Posted by Sinnlover
You made the cardinal error - getting the macro out!
On the odd occasion I have sold a watch I'll give it a quick wipe over and think it looks OK........ but when I Look at the pics! :eek-new:
Another example of a post which again confirms to me why I wouldn’t send Walter a timex to fixQuote:
Originally Posted by walkerwek1958
Sent from my iPhone using Tapatalk Pro
I mean, savage and all that.Quote:
Originally Posted by MFB Scotland
Whats worst is i cant see it as wonky in the OPs pic. The galsses are already on the way before anyone suggests that option!
Rgds
They come new from the factory with the symbols facing any old how so I don't actually see the problem.
I wouldn't be surprised if the two in Sinnlover's pic are the original crystals too.
Both are original crystalsQuote:
Originally Posted by Neil.C
I too have no issue with it. It does not affect the use of the watch and the logo is almost invisible. On the older Seamaster the crystal has so many marks you really have to look for it.
Mine doesn’t have an Omega symbol on the crystal? Perhaps Walkerwek1958 removed it as a little prank when he serviced it for me? (And an excellent job he did too…and he knows how precious I am about my Speedie!)
The etched logo is not actually something that's meant to be aligned, as evidenced by the random fashion in which Omega fit them. I suspect that a large proportion of Speedmaster owners are unaware that they exist. Therefore I find this unnecessarily judgemental.Quote:
Originally Posted by MFB Scotland
My watchmaker realigned the crystal for me when I had a dial swap.
https://i.postimg.cc/L43q36Z3/F0-F3-...-EFDFF4139.jpg
I wouldn’t really care if he had or hadn’t. This was in the days that I could buy a watch for a grand, modify it, sell the original bits on then sell the watch on and maybe break even/lose £100-200 in the whole package but enjoy the watch for a few months before moving on……
In terms of originality... if Omega don't align them when new, surely lining the omega up makes the watch less original?
Mind you, I'm sure that argument wasn't made for the wonky Seiko chapter rings a few years back.
MFB Scotland just doesn’t like me!Quote:
Originally Posted by monogroover
He’s entitled to his opinion to dislike me but ill- founded sideswipes at my competency as a watch repairer are unnecessary.
Refitting an acrylic crystal can prove to be a challenge, some are are very tight-fitting. I’ve ordered genuine Omega crystals that have proved difficult to fit, even with a press care is needed to locate the crystal and apply pressing force evenly. In this situation its all too easy to misalign the logo and frankly I don’t care too much if that happens provided the crystal has gone fully home without damage.
I don’t think this forms a basis for questioning my competence or ability as a fixer of watches, does it?
Just revisited a few comments on this thread.......ouch!
I’ve invited one of my critics to have a phone discussion to clarify his comments, that'll be interesting.......if it happens!
All too easy to snipe at people from your keyboard with absolutely nothing to back it up.
Regarding the Omega symbol in the crystal, does anyone know what year Omega started using it? Strictly speaking, an Omega watch that predates that time shouldn’t have the symbol but all Omega- supplied replacements have it so that conflicts with the concept of originality! on that topic, the replacements supplied from Omega are often a different profile from the original and they don’t look quite right, a generic Sternkrautz is sometimes a closer match albeit without the symbol.
Trickiest acrylic crystals to fit are those with a cyclops, that HAS to line up exactly and that can be a challenge.
The logo crystal was first seen around 1950, watches before that didn't have it, but of course a logo crystal could have been fitted at Service time.
The Hesalite crystals on Omega like these are aligned by the factory, you just need to understand how. Each crystal comes with a tension ring which has a visible split in it. The alignment is to put that split where it is least noticeable, ie not at the 12:00 point but somewhere between 5 and 7. A plastic crystal logo can come with any orientation and still meet the ring alignment rule but I tend to work on the basis that if a logo is perfectly aligned, it is either a coincidence or more likely the crystal was replaced by someone in the aftermarket who isn't aware of this. The few Omegas that have sapphire crystals with logos* do tend to be aligned from the factory AFAIK.
*the Trilogy RM and SeaM are such
If the tension ring is a split one I aim to align the split to coincide exactly with an hour marker/ baton. However, according to a previous poster it’s unlikely that I know what I’m doing!
Looking forward to a discussion with this guy.
Still no response from bobc, I’ve given him chance to discuss his disparaging comments but he’s gone v.quiet.
Clearly, he took exception to my post and that prompted an ad hominem attack, don’t know what his motive was and it looks like the cat’s got his tongue, he’s not prepared to enlighten me.
Rather than clear the air, have a frank exchange of views if necessary, then move on he’ll lurk around and continue to make snarky comments when I post stuff, a predictable and somewhat sad MO that’s all too common on forums like this.
To those of you who own Omegas with acrylic crystals, don’t draw the wrong inference if your Omega symbol isn’t lined up as you’d like, this does not reflect on the competence of the monkey, cowboy or competent watch repairer who fitted it, if it’s fitted correctly with no cracks and the watch is waterproof you don’t need to fret. The crystal needs to be pressed fully home and sit flat in the case, that’s the important bit............... despite what bobc might try to imply. Could always ask how many he’s fitted, but I think we can guess the answer!
My 2015 Speedmaster had a wonky logo. Did bother me a bit when I noticed it but life goes on. Until 2 years later I had a chrono reset issue and sent it back to Omega for fixing. They replaced a few components including the pushers and glass. The etching on the newly installed glass was perfectly aligned. Seems someone cared enough to make it right.
Sent from my iPhone using Tapatalk