I’m changing the insert on my Glycine and have removed the bezel and the insert. I’ve refitted the bezel twice now but each time it wouldn’t turn. Before I try again I thought I’d ask the collective for advice. I’ve attached pics of the underside and topside of the bezel and also the ball bearings in the case at 12 and 6 positions.

I noticed that one end of the click spring was out both times I removed the bezel. As I thought this was probably the culprit I tucked it back under the bezel. Was that the issue? Should one end by poking out? On the pics you can now see the spring from the topside but not from underneath - is that right?

You’re supposed to place the bezel back on the case lines up at 12, push down and hear and feel the click. That all happened both times but it wouldn’t turn.

All advice greatly appreciated.

[IMG] [/IMG]