Home office reno and desk set-up

[Mj2k]

That REALLY bugs me as well, Matt - top of the head in shot and they don’t even attempt to make an adjustment. Sadly, I’m unable to adopt your nonchalance as a consequence - whatever I do I’m compelled to do it the very best level that I can.

Was one comedic moment where someone forgot they were on cam & lit a cigarette. No issue in your own house, but not the best image on camera. Bloody amusing though!

Where was the desk top from, scanned back through but didn’t spot it? Toying with the upgrade, then remembered I needed new legs as well or the issue of power exists still.

Spent most of today on loooong calls in the Eames, it is so comfy I could easily drift off in it, which is a worry. Walls still bare, but plans in place. Need to record a call with myself as concerned with hard floor & no real soft furnishing I’m boomy, but probably over thinking things, as I tend to!


Sent from my iPad using Tapatalk

[learningtofly]

Was one comedic moment where someone forgot they were on cam & lit a cigarette. No issue in your own house, but not the best image on camera. Bloody amusing though!

Where was the desk top from, scanned back through but didn’t spot it? Toying with the upgrade, then remembered I needed new legs as well or the issue of power exists still.

Spent most of today on loooong calls in the Eames, it is so comfy I could easily drift off in it, which is a worry. Walls still bare, but plans in place. Need to record a call with myself as concerned with hard floor & no real soft furnishing I’m boomy, but probably over thinking things, as I tend to!


Sent from my iPad using Tapatalk

It's from here. Not expensive as I know at some point I'm going for a solid wood sit/stand.

On calls with my team, I openly vape (they're used to it). On other calls, particularly long ones, my camera is occasionally off whilst I indulge. I wouldn't let anyone outside my team see me doing it, though.

[Mj2k]

It's from here. Not expensive as I know at some point I'm going for a solid wood sit/stand.

On calls with my team, I openly vape (they're used to it). On other calls, particularly long ones, my camera is occasionally off whilst I indulge. I wouldn't let anyone outside my team see mo doing it, though.

Cheers for the link, Tony. Will have a good look over the weekend.

Am sure I’d vape internally if I still did. Quite glad I’d quit way before WFH as not leaving my desk to vape would have been way too tempting. I love seeing high end kit like yours and do miss the experimentation.

As I use a virtual background, I find a swiftly applied coaster over the cam allows for a sip of anything after hours as required and looks like a cam glitch. I hope so anyway!


Sent from my iPad using Tapatalk

[learningtofly]

Cheers for the link, Tony. Will have a good look over the weekend.

Am sure I’d vape internally if I still did. Quite glad I’d quit way before WFH as not leaving my desk to vape would have been way too tempting. I love seeing high end kit like yours and do miss the experimentation.

As I use a virtual background, I find a swiftly applied coaster over the cam allows for a sip of anything after hours as required and looks like a cam glitch. I hope so anyway!


Sent from my iPad using Tapatalk

Without a green screen I don't find that any of the virtual backgrounds - even blurring, in fact - work properly. You can always see from any kind of movement that they're not real, so I could never allow myself to use one.

[Mj2k]

Without a green screen I don't find that any of the virtual backgrounds - even blurring, in fact - work properly. You can always see from any kind of movement that they're not real, so I could never allow myself to use one.

Love the fact you have such high standards, Tony, well played!

Been looking at the desk top you linked and they do look nice - is the mouse smooth enough without a mat, as can’t see one in your pics.

Couple of Luddite questions as I’m dangerous with DIY.

Do the legs just screw in with a few small screw in each corner?
Did you drill pilot holes?p or just screw them in?
Cable management, did you use their tray & screw it in (pilots too)?
Doesn’t look like you have a cable management hole, correct?

Cheers


Sent from my iPad using Tapatalk

[learningtofly]

Love the fact you have such high standards, Tony, well played!

Been looking at the desk top you linked and they do look nice - is the mouse smooth enough without a mat, as can’t see one in your pics.

Couple of Luddite questions as I’m dangerous with DIY.

Do the legs just screw in with a few small screw in each corner?
Did you drill pilot holes?p or just screw them in?
Cable management, did you use their tray & screw it in (pilots too)?
Doesn’t look like you have a cable management hole, correct?

Cheers


Sent from my iPad using Tapatalk

Okay...

Desk mat - I have this one (large size) arriving in a couple of days. The mouse works perfectly without it but the desk itself is a bit of a dust magnet as is.

Leg fixings - depends entirely on your existing legs. Mine were fixed to the original desktop using those steel plugs that you find in pre-built furniture - I had to get them out and then fit them into the underside of the new desktop before I could screw the legs on, but yours may well be simple screws. (Thinking about it, I could actually have just used simple screws with washers, which would have made life a lot easier!)

Pilot holes - yes, I drilled pilot holes first and then used a wireless screwdriver. Screwing by hand would have been challenging.

Cable management - I've already fitted a cable tray, but still need to stick a multiple plug adapter to the underside of the desk with double-sided adhesive before addressing cable management. Once done, though, I'll just have a single power cable visibly going to the desk and everything else will plug straight into the power adapter with the leads sitting inside the cable tray.

Just to add, remember that I'm still recovering from major surgery, and am far from fully healed at the moment. Consequently I'm having to take things nice and slowly, and for some tasks need my son here to help me.

[MattMM]

Great thread folks in the time honoured TZUK tradition. I work hybrid for a large Life Science company and my role encompasses EHS with areas such as display screen and home workstation setup for remote workers. Golden rules for this include the top of monitor to be level with your eyes (also good with webcam), adjustable seats are great - ideal height being your forearms should be parallel with ground when using keyboard and mouse, padded or gel wrist supports are also good if you do prolonged typing and are prone to carpal tunnel or RSI. My companies fairly enlightened in that it supplies things like adjustable office chairs and also standing desks to remote workers.

Having worked initially during lockdown from my kitchen table using boxes and books to attain optimum setup, I have now evolved to heading to sofa with footstool for longer calls using a padded laptop cushion and elevated stand similar to this

https://amzn.eu/d/fkB83SJ

which enables webcam use (with judicious choice of corporate Teams background). Well jealous of our Eames chair owning member though…

[Mj2k]

Okay...

Desk mat - I have this one (large size) arriving in a couple of days. The mouse works perfectly without it but the desk itself is a bit of a dust magnet as is.

Leg fixings - depends entirely on your existing legs. Mine were fixed to the original desktop using those steel plugs that you find in pre-built furniture - I had to get them out and then fit them into the underside of the new desktop before I could screw the legs on, but yours may well be simple screws. (Thinking about it, I could actually have just used simple screws with washers, which would have made life a lot easier!)

Pilot holes - yes, I drilled pilot holes first and then used a wireless screwdriver. Screwing by hand would have been challenging.

Cable management - I've already fitted a cable tray, but still need to stick a multiple plug adapter to the underside of the desk with double-sided adhesive before addressing cable management. Once done, though, I'll just have a single power cable visibly going to the desk and everything else will plug straight into the power adapter with the leads sitting inside the cable tray.

Just to add, remember that I'm still recovering from major surgery, and am far from fully healed at the moment. Consequently I'm having to take things nice and slowly, and for some tasks need my son here to help me.

Missed this reply, Tony, thank you.

That desk mat is lovely, puts mine to shame & may have to have a look at another.


Sent from my iPad using Tapatalk